3 Pod A-pillar

[Dean72]

Does anyone know if there is a vehicle-specific 3 pod A-pillar for the Fiestas? All I’m finding is universal and universal isn’t such a thing in this case.


2014 Ford Fiesta SE Hatchback
Cold Air Intake
OBX Header with high-flo cat, resonator, and DC Sports muffler and 2.5” exhaust
N2MB Two Step
FRPP Suspension
17” Focal with 205/45s
3M Dark Smoke Vinyl Wrapped Lights

 

[LionsTooth]

http://ortizcustompods.com/ford.html

 

[scotman]

If i didn't have a scangauge and a Inova scan tool, i would be on that 3 gauge pod!
I still want one, but at the rate i am breaking bolts i need to exercise some budgetary restraint.

 

[LionsTooth]

If i didn't have a scangauge and a Inova scan tool, i would be on that 3 gauge pod!
I still want one, but at the rate i am breaking bolts i need to exercise some budgetary restraint.

Partial to the two-hole over the steering column. Water temp & volts.

 

[Dean72]

I’m wanting to put water temp and oil pressure gauges in. Speaking of gauges... anyone stick an aftermarket tach gauge with shift light in?


2014 Ford Fiesta SE Hatchback
Cold Air Intake
OBX Header with high-flo cat, resonator, and DC Sports muffler and 2.5” exhaust
N2MB Two Step
FRPP Suspension
17” Focal with 205/45s
3M Dark Smoke Vinyl Wrapped Lights

 

[sundaynightcoffee]

These look so good, idk if id need more info though just to justify them in there