• Sign Up! To view all forums and unlock additional cool features

    Welcome to the #1 Ford Fiesta Forum and Ford Fiesta community dedicated to Ford Fiesta owners and enthusiasts. Register for an account, it's free and it's easy, so don't hesitate to join the Ford Fiesta Forum today!


Ford fiesta stereo color code or diagram?

EZdusIt77

New Member
Messages
7
Likes
0
#1
Does anyone know where to find the 2012 ford fiest stereo's color code or diagram? Any of the ones I find on the internet don't have the same wire colors as my head unit in my fiesta
 

MKVIIST

Senior Member
Staff Team
Messages
1,512
Likes
70
State
AZ
Country
United States
#2
Do you have the 4 or 6 speaker system? Can you elaborate what you want to do?


Left Front Speaker Positive Wire (+): White
Left Front Speaker Negative Wire (-): White/Brown
Right Front Speaker Positive Wire (+): White/Violet
Right Front Speaker Negative Wire (-): White/Orange

Left Rear Speaker Positive Wire (+): White/Green
Left Rear Speaker Negative Wire (-): Brown/Yellow
Right Rear Speaker Positive Wire (+): Brown/White
Right Rear Speaker Negative Wire (-): Brown/Blue
 
OP
E

EZdusIt77

New Member
Messages
7
Likes
0
Thread Starter #3
4 speakers with 2 tweeters up in the dash somewhere. I'm trying to connect my BTA8100FHC amplified BAZOOKA bass tube using the FAST9999 and FAST-BTAH harnesses that it came with
 
OP
E

EZdusIt77

New Member
Messages
7
Likes
0
Thread Starter #4
Do you have the 4 or 6 speaker system? Can you elaborate what you want to do?


Left Front Speaker Positive Wire (+): White
Left Front Speaker Negative Wire (-): White/Brown
Right Front Speaker Positive Wire (+): White/Violet
Right Front Speaker Negative Wire (-): White/Orange

Left Rear Speaker Positive Wire (+): White/Green
Left Rear Speaker Negative Wire (-): Brown/Yellow
Right Rear Speaker Positive Wire (+): Brown/White
Right Rear Speaker Negative Wire (-): Brown/Blue
6 speaker. 2 in the back, 2 in front, and 2 tweeters. I'm trying to connect my BTA8100FHC amplified BAZOOKA bass tube using the FAST9999 and FAST-BTAH harnesses that it came with
 
Last edited:

MKVIIST

Senior Member
Staff Team
Messages
1,512
Likes
70
State
AZ
Country
United States
#5
OP
E

EZdusIt77

New Member
Messages
7
Likes
0
Thread Starter #6

MKVIIST

Senior Member
Staff Team
Messages
1,512
Likes
70
State
AZ
Country
United States
#7
I've already taken it apart and pulled out the radio, and put it back together. I'm gonna keep trying other wise the fast harness is a waste and throw more money at an inline convertor
Well in that case the speaker wires you want to tap into are the ones I posted above.
Left Front Speaker Positive Wire (+): White
Left Front Speaker Negative Wire (-): White/Brown
Right Front Speaker Positive Wire (+): White/Violet
Right Front Speaker Negative Wire (-): White/Orange


I would still recommend using a fuse tap for the Red (12volt) and Blue/White for the remote.

Just in case this is what I was referring to when I mention fuse tap.


 

Steve-0

New Member
Messages
1
Likes
0
#9
This info is helpful, it is the same as the 16 right? im installing my 12 from my old car into this one with a scoshe loc, with remote base control. thinking about putting the amp under front passenger seat.
 

MKVIIST

Senior Member
Staff Team
Messages
1,512
Likes
70
State
AZ
Country
United States
#10
This info is helpful, it is the same as the 16 right? im installing my 12 from my old car into this one with a scoshe loc, with remote base control. thinking about putting the amp under front passenger seat.
Yup it's the same.
 

Galion

New Member
Messages
4
Likes
0
#11
I am installing one sub and I found this fourm to find the colours. I found them but one problem. The one one the right door "brown and white positive " is a bigger wire then all of them. The two on the left door are skinny brown/yellow and white/green. The wire on the right door Brown/blue is also skinny. But the brown and white is larger then all three of them. Right and left speaker wire https://imgur.com/a/elCjg
 


Top